Home>>Top

Test questions of the hottest special equipment sa

2022-10-16

Detail

Special equipment safety knowledge competition questions

special equipment safety knowledge competition questions

I. multiple choice questions

1. The regulations on safety supervision of special equipment shall be implemented as of ()

a, June 1st, 2002 B, June 1st, 2003 C, June 1st, 2004

2. The "special equipment" mentioned in the regulations on safety supervision of special equipment refers to boilers, pressure vessels, pressure pipelines, (), passenger ropeways, and large amusement facilities that involve life safety and are relatively dangerous

a, elevators, hoisting machinery B, automobiles, explosion-proof electrical appliances C, railway locomotives, machine tools

3. Those () who produce and use special equipment shall be fully responsible for the safety of their own special equipment

a, main person in charge B, safety administrator C, department head

4, above the county level () should urge and support the safety supervision and Management Department of special equipment to perform the safety supervision duties according to law, and coordinate and solve the major problems existing in the safety supervision of special equipment in a timely manner

a, people's Government B, work safety leading group C, bureau of quality and technical supervision

5, the boiler scope in the regulations on safety supervision of special equipment refers to ()

a, pressure steam boiler B, atmospheric hot water boiler C, simple boiler

6. Steam boilers within the scope of safety supervision specified in the regulations on safety supervision of special equipment refer to steam boilers with a volume greater than or equal to ()

a, 20L pressure bearing B, 30L non pressure bearing C, 30L pressure bearing

7. The maximum working pressure (MPA) and nominal diameter (mm) of the pressure pipeline range specified in the regulations on safety supervision of special equipment are () respectively

a, greater than or equal to 0.05, greater than or equal to 30b, greater than or equal to 0.1, greater than or equal to 25C, greater than or equal to 0.1, greater than 25

8. Before or after the special equipment is put into use (), the unit using the special equipment shall register with the District Bureau of quality and technical supervision, and the registration mark shall be placed or attached to the prominent position of the special equipment

a, 30 days B, 15 days C, 10 days

9. The unit using special equipment shall, in accordance with the regular inspection requirements of the safety technical specifications, put forward regular inspection requirements to the special equipment inspection and testing institution before the expiration of the valid period of safety inspection ()

a, 1 month B, 2 months C, 3 months

10. The regulations on safety supervision of special equipment stipulates that the safety supervision and Management Department of special equipment shall implement key safety supervision on the landing of the lower platen for special equipment in the following () places

a, schools, kindergartens B, factories, shopping malls C, party and government organs, stadiums and gymnasiums

11. The main body of administrative punishment for safety supervision of special equipment is ()

a, entrusted institutions B, inspection and testing institutions C, special equipment safety supervision and management department

12, the unit using special equipment shall conduct at least () self inspection on the special equipment in use and make records

A, weekly B, monthly C, quarterly

13, () design units shall be licensed by the special equipment safety supervision and Administration Department of the State Council before engaging in corresponding design activities

a, boiler B, pressure vessel C, elevator

14, the local special equipment safety supervision and management department refers to ()

a, local special equipment inspection institute B, local bureau of quality and Technical Supervision C, local special equipment department or section

15. According to the regulations on safety supervision of special equipment, the following () equipment should be scrapped and cancelled to the original registration authority

a. there have been more than serious accidents B. the inspection cycle has been exceeded C. the service life has been exceeded as stipulated in the safety technical specifications

16. The boiler user unit shall file with the safety supervision organization that accepts the use registration after the shutdown or scrapping () and handle the shutdown or cancellation of the use registration procedures

a, 60 days B, 30 days C, 90 days

17. When the boiler pressure vessel is out of service for more than one year, the user unit shall seal the boiler pressure vessel and apply to the registration authority for shutdown after sealing ()

a, B on the 45th, C on the 30th, C on the 15th

18. When handling the relevant administrative approval matters stipulated in the rules, the special equipment safety supervision and management department must make the procedures of acceptance, examination, permission and approval public, and PP accounts for 17% [3] within () from the date of accepting the application, it shall make the decision of permission, approval or disapproval

a, 10 days B, 20 days C, 30 days

19. The higher the pressure, the saturated steam temperature of the boiler ()

a, higher B, lower C, unchanged

20, higher pressure, the working principle of pressure fatigue testing machine and what classifications do you know? Accuracy requirements of force gauge ()

a, higher &n